Countless features are held by Netgear routers out of which enabling QoS can do wonders. QoS stands for Quality of Service that helps the user to prioritize internet traffic as per the bandwidth and network requirement. Well, it is not a secret that there are a lot of networking devices in our homes that support different applications. These applications may belong to audio, video, FTP, etc. All of them require different speeds. Therefore, to ensure that all of them are getting the required internet speed, you should definitely enable QoS on your Netgear router by accessing the routerlogin.net URL.
Before You Enable QoS on Netgear Router
You need to make some preparations before starting the process of enabling the QoS feature on your wireless router. Below we’ve listed all of them so that you will be able to complete the process in a hassle-free manner:
- The Admin Password of Your Router: The very first thing you will require to prioritize the internet traffic on the Netgear router is the admin password. For your information, the default password is admin. So, consider putting this value to use whenever needed. However, keep in mind that the default one will not work in case you have changed it in the past.
- An Updated Internet Browser: Since the entire process will be carried out using the Netgear router’s administration portal, you’ll need a web browser to get it completed. Thus, make sure that you have access to an updated one. You have plenty of choices when it comes to selecting web browsers. Apart from being updated, the one you are going to employ for the process must be free of junk files.
After you gain your hands on the aforementioned factors, you are suggested to walk through the information highlighted in the given section. But, before that, power cycle your WiFi router. Doing so will resolve technical glitches and prevent you from facing any issues amidst the process.
Steps to Enable QoS on Netgear Router
Connect the Router to the Modem
If you haven’t connected your Netgear router to the modem, then do it right away. Thus, grab an Ethernet cable and use it to connect both devices properly. While doing so, be very sure that your router and modem are turned off. After creating the LAN connecting between your devices, consider powering up the modem first and then the router. The connection created by you must be finger-tight. As soon as the LED lights on your router become stable, follow the next step.
Visit routerlogin.net
The next step is to load an internet browser. Therefore, switch on your computer and connect it to the WiFi network that belongs to your router. Once done, open your favorite browser and visit routerlogin.net. Just in case you come across the routerlogin.net not working issue, consider using the default IP address of your router. For your information, the default IP of a majority of Netgear routers is 192.168.1.1. However, cross-check the user manual before proceeding further.
Enable QoS
After visiting the login address of your Netgear router, input the router’s password and user name on the next page. The moment you reach the dashboard of your router, select the Advanced option. Thereafter, click Setup > QoS setup. If you want to set up the priority for an application or online gaming, select Applications or Online Gaming under the Priority Category. Select the Priority level and click Apply.
The Bottom Line
Now, we are wrapping up the post that focused on enabling the QoS on the Netgear router. We hope that you will be able to enable this feature with the help of the instructions given above. Now, you can enjoy the internet on your WiFi devices without any fluctuation.